Showing 1–12 of 87 results

  • The Afla-OtaCLEAN columns are available in the practical 3 mL polypropylene format, which has significant handling advantages over columns with a smaller inner diameter. The column bed consists of a soft-gel, separated by frits to ensure highest recoveries for both toxin types, which is covered by a storage buffer. The storage buffer contains a preservative. Afla-OtaCLEAN was developed for the sample preparation within the food analysis via HPLC with fluorescence detection and  LC-MS, respectively.


    Advantages at a Glance

    • 3 mL format
    • Shelf life: 18 months at room temperature between 4 and 30 °C
    • Capacity Aflatoxin B1: 150 ng Aflatoxin B1
    • Capacity Ochratoxin A: 200 ng Ochratoxin A
    • Best recoveries: B1 > 90 %, B2 > 80 %, G1 > 90 %, G2 > 60 %, ochratoxin A > 90 %
    • Suitable for automated processing
  • AflaCLEAN

    Immunoaffinity Columns for Aflatoxins B1, B2, G1 und G2.

    The AflaCLEAN columns are available in the practical 3 mL polypropylene format. The shelf life of the columns is 24 months at storage temperature between 4 and 30°C. The maximum loading capacity is 150 ng B1 absolute.


    AflaCLEAN Select

    Immunoaffinity Columns for Aflatoxins B1, B2, G1 und G2

    The AflaCLEAN Select columns are available in a convenient 3 mL polypropylene format or additionally as 1 mL version. Shelf life is 9 months cooled at 4 to 8°C. The loading capacity is 200 ng Aflatoxin B1.



    Small + Fast + Economical = SMART

    The immunoaffinity columns AflaCLEAN SMART columns are available in small polypropylene format, which has significant handling and storage advantages over larger columns.


    Read more about the Aflatoxin columns in the brochure in downloads.

  • AflaCLEAN M1 Select

    Immunoaffinity Columns for Clean-up of Aflatoxin M1

    The AflaCLEAN M1 Select columns are available in a 3 mL polypropylene format. The quality of the columns is so high that even in difficult matrices, e.g. baby food, excellent results can be achieved.



    Immunoaffinity Columns for Clean-up of Aflatoxin M1

    To speed up processing, the SMART format of the immunoaffinity columns is a good option. With a sample processing time of less than 20 minutes, the total processing time is significantly reduced in comparison with the 3 mL columns.


    Read more about the AflaCLEAN M1 Columns in the Brochure in downloads.

  • Asbestos Inspection Cabinet is a HEPA filtered ductless safety cabinet which provides operator protection from fibres and articles.


    Bigneat’s BA cabinet has excellent access through tear drops in the front panel to the cabinet interior for manipulation of the contained microscope and sample slides.


    The lower panel is supplied with an aperture to accept a microscope eye piece. This will be cut to suit individual requirements prior to delivery. Cabinet may be placed onto an existing work surface or supplied with its own support stand/mobile bench. The mobile bench with castors makes the cabinet portable.


    BA cabinets are available in two cabinet widths; 800 and 1000mm.


    Bigneat’s BA Asbestos Inspection Cabinet is manufactured to a very high standard using only the best quality materials. The fan housing is manufactured from mild steel and is finished with an epoxy white coating. The enclosure is frameless, fabricated from optically clear acrylic which is UV stable, chemically resistant and easy to clean. A services port with a cover is provided in each side panel.


    Air is drawn through the apertures in the front of the cabinet and upwards into the filtration system, clean air is returned to the room.


    The cabinet is designed to operate at a minimum face velocity of 0.5 m/s which is manually adjustable. An LCD air flow indicator is supplied to provide readout of flow rate. Double hinged panels facilitate easy access to cabinet interior for cleaning and loading.


    The ASP2000 is a precise micro-stepping, high torque drive “workhorse” liquid handler Autosampler that delivers robust performance for fast and accurate sample preparation and direct injection into UV and HPLC systems. The ASP2000 is suitable for a wide variety of applications with the capability of piercing multiple septa with very high accuracy and repeatability. It also has the capability to inject into minute injection ports. This unique near perfect design of hardware and software perform sample processing tasks effortlessly with seamless integration with the IDIS™ data management system configurations.


    ASP2000 comes in 3 configurations: Single Need Single Probe; Multiple Needle Single Probe and Dual Probe, Single and Multiple Needle.

  • The ADC 2 offers convenience, safety, and reproducibility for isocratic developments of  20 x 10 cm HPTLC glass plates in full compliance with Ph. Eur. Chapter 2.8.25 and USP Chapter <203>.


    The ADC 2 is a device for reproducible plate development. It performs the development step fully automated, and independent of environmental effects. The activity and pre-conditioning of the layer, chamber saturation, developing distance and final drying can be preset and automatically monitored by the ADC 2. Two modes of operation are possible: stand-alone with input of parameters via keypad, or remote operation from visionCATS with process monitoring, documentation of operating parameters, and reporting.

    With visionCATS the ADC 2 can be IQ/OQ qualified and used in a cGMP environment. Operated with the mentioned software, the ADC 2 supports compliance with 21 CFR Part 11.


    Key Features

    • Fully automated development
    • Development in 20 x 10 cm Twin Trough Chamber
    • HPTLC plates (20 x 10 cm)
    • Operation in stand-alone mode or software-controlled
    • Fully traceable operation
    • Option “Humidity Control” allows reproducible chromatography.
  • The ATS 4 is a device for fully automated sample application onto TLC and HPTLC plates. Samples can be applied as bands, spots or rectangles.


    Automatic sample application is a key factor for productivity of the HPTLC laboratory. The ATS 4 offers fully automatic sample application for qualitative and quantitative analyses as well as for preparative separations. It is suited for routine use and high sample throughput.


    Key Features

    • Fully automated sample application
    • Application of bands, spots or rectangles
    • Any plate format up to 20 x 20 cm
    • Spray-on application or by contact transfer
    • Software-controlled by visionCATS
    • Heated Spray Nozzle (option)



  • After a long development, BCON’s very first own product is a fact: The BCON LTU is almost available! The LTU (Leaching Test Unit) has been specially developed for leaching tests: the so-called column tests. But what exactly does leaching testing entail and how can our LTU make your laboratory work easier?


    With leaching testing, water is continuously pumped over a soil sample at a low flow. The fractions that are subsequently collected must be weighed regularly to check whether the pumped volume actually comes out of the column. This can be an intensive and time-consuming task.


    BCON has therefore now developed a fully automatic machine that can collect up to 7 fractions based on weight! The BCON LTU uses liquid valves, which automatically switch to the next fraction when a fraction is completed. In other words: manually checking the fractions is a thing of the past thanks to the BCON LTU!


    Do you want to be the first to use the BCON LTU in your laboratory? Or do you simply want more information about this fully automatic leaching test unit? Then feel free to contact us without obligation. We are more than happy to provide you with the information you are looking for.


    Request more information

  • CaRo is a smart laboratory sampling system designed for daily laboratory routines. The device together with our micro-metering pumps provides fully automated liquid handling by using of control software. The multifunctional interface allows integration of CaRo in different laboratory systems. CaRo system can be scaled suitable to client requirements and can be produced as an OEM version.


    • Customizable dimensions and hardware setup
    • Free programmable moving sequences
    • 1, 2 or 3 axis system
    • TTL, Relay and PC Interface
    • Control software available
    • Positioning accuracy < 0.2mm
    • Working area up to 550 x 300mm
  • LCTech columns are ready-to-use. DEXTech 16, DEXTech Pure, DEXTech Plus and DEXTech Heat are designed with a 3-column setup using an acidic silica column (pos. 1), an aluminium-oxide or florisil column (pos. 2), or a carbon column (pos. 3). Simply click in the respective columns in the column tower- “just click it”. Afterwards a patented mechanism of the system automatically locks the tower. No screw connections, no tools, no other manual steps. From sample to sample – fast, flexible, effortless.


    Variety of columns:

    Position 1: Universal or SMART Column

    Depending on the individual requirements, matrix or desired method, each dioxin-system of the DEXTech product family can be equipped with different ready-to-use column setups:


    Universal Column:

    • The fat can be degraded by the acidic silica gel, which is impregnated with concentrated sulphuric acid. The user has visual control due to the glass material of the column.
    • The loading capacity of the Universal column is with 5 g of fat very high, and is essential in order to achieve the low detection limits.
      Due to a special silver nitrate layer, the Universal column is suitable for all kind of matrices, even for those containing Sulphur.


    SMART Column:

    • For samples with content of up to 1.5 g fat or a small matrix load
      Advantage: Significantly reduced amount of solvent as well as the processing time

    Easy change between Universal and SMART column by using the adapter.


    Position 2: Aluminium-Oxide or Florisil Column

    • Suitable for DEXTech 16, DEXTech Pure, DEXTech Plus and DEXTech Heat
    • Depending on amount and composition of target fractions the Florisil column can also be used at this position in DEXTech Plus.


    Position 3: Carbon Column

    • Reusable up to 10 times: this reduces the already low column cost
    • Advantage for DEXTech Pure, DEXTech 16 and DEXTech Heat:Cost saving for “pure” PCB analysis, because the carbon column is not needed and replaced by a dummy column.
  • D-EVA (Dioxin-Evaporation) is a brilliant solution for fast, parallel, and reproducible evaporation of 1 – 26 samples. The number of samples to be processed in the rotor is irrelevant in this regard. The system concentrates your samples with vacuum and energy supply via light to a low volume and reliable prevents evaporation to dryness due to a special LCTech sensor.


    Automatic Stop for Unattended Processing

    The LCTech sensor allows reliable evaporation nearly to dryness or as usually to a final volume of 30 to 100 µL for the PCDD/F-Fraction (F2) or a final volume of 300 to 500 µL for the PCB-Fraction (F1). Even with rinsing, the subsequent transfer into the insert of a GC-vial is possible. Due to design and the special technology, memory effect that would lead to unwanted further evaporation after the system has been switched off, is reliable excluded.

  • A compact, versatile, quick and robust scanner with minimal cabling.


    The Ziath DataPaq™ Cube Rack Reader is a 2D datamatrix tube camera reader with a scan & decode time of 1-2 seconds on a ‘normal’ computer. The Cube can read all racks on the market including Cryoboxes and SBS racks; even 384 racks.



    Key features

    • Compatible with 24, 48, 96, 240, 384 SBS racks
    • Compatible with 81 and 100 cryoboxes
    • Smallest ‘scan all’ scanner on the market
    • Camera based instrument resulting in rapid imaging and decoding
    • Footprint ideal for benchtop and integration
    • Minimal cabling


    Easy to set-up and easy to use

    The DataPaq™ Cube Rack Reader is easy to set-up, and can be ready to use only a few minutes after taking it out of the box. The rack reader arrives fully calibrated and is ready to read all makes of SBS format and Cryobox 2D barcoded racks and tubes. Our patented DataPaq™ Cube is a camera-based instrument and is significantly quicker than scanner-based 2D barcode readers: just one second and you can load the next rack! Our DataPaq™ software makes it simple to export data to Excel, XML or text, and scanned images can also be saved. The DataPaq™ software can connect with Oracle, SQL Server, MySQL, Postgres and other databases.


    DataPaq™ Software

    The DataPaq™ software is designed and written in-house at Ziath. Decoding 2D barcodes is achieved using our own algorithm which we specifically developed for ‘tube sized’ codes It is not a global, generic “off-the-shelf” algorithm that was designed to read a barcode in a supermarket. DataPaq™ displays the results of the scan and can identify the difference between a correctly scanned tube (green), a damaged tube (red) and missing tube (grey). Also, any tube image can be clicked on and the individual scan is shown (on the right hand side) with the tube location and barcode.


    Cryoprotection™ Option

    The formation of condensation on the instrument window whilst scanning tubes straight from cryogenic storage is a well known problem. Ziath’s Cryoprotection™ is a special coating that eliminates the condensation and ensures uninterrupted scanning. Ziath’s method for eliminating condensation uses no extra electrical components, resulting in no risk of accidentally thawing your samples, increased reliability and ensuring that the cost of this option is at acceptable levels.