Showing 25–36 of 83 results

  • Ductless Fume Cabinet. A range of six widths and an educational version.

    When you want a ductless fume cabinet or hood to contain and remove hazardous fumes, vapours, gases and/or particulates in your laboratory turn to Chemcap Clearview.

     

    Ductless Fume Cabinet and hoods

    An economical solution for containing chemical fume hazards; a recirculatory Chemcap carbon filtration fume hood, may be supplied with a support bench, or placed directly onto the laboratory bench.

     

    Once a laboratory is built it can be difficult to install new fume cupboards, the disruptive work of installation of ducting along with the capital cost of the equipment required and the planning consent needed, is sometimes prohibitively expensive and always time consuming.

     

    Chemcap hoods are ductless with recirculatory filtration, they incorporate efficient ‘Chemcap’ carbon filters for fume removal and HEPA filters for particulates. They work by purifying air drawn through the filters and returning it thoroughly cleaned back to the room. Ductless fume cabinets provide additional safe ventilated space when you are running out of fume cupboard space.

  •  

    The DXi-80 is our multi-channel syringe pump for liquid handling applications in the 10μl to 5 ml range. The unit is available in an 8-channel configuration and is ideal for multi-probe liquid handling tasks such as sample transfer, dilutions, mixing, reagent addition and plate reformatting.

     

    The design of the pumps offers a compact solution for parallel liquid handling applications, minimizing logistical restrictions. Customers choosing this instrument will benefit from long life, low maintenance robustness and reliability, ultimately, leading to greater satisfaction.

     

    The DXi-80 multi-channel Syringe Pump is available with 100μl, 250μl, 500μl, 1.0 ml, 2.5 ml and 5.0 ml syringe volumes and features simultaneous multichannel operation.

     

    This Pump uses a PTFE coated leadscrew, with anti-backlash nut, driven by a stepper motor. The travel length of the plunger is 60 mm and the drive incorporate a quadrature encoder for step loss detection.

     

    This unit features a bidirectional communication interface (RS232, RS485, or CAN) and communication protocol. Multimodule communication is possible through either RS485 or CAN interfaces, addressing up to 15 modules through a single communication bus. The pump also provides two digital inputs and three outputs for TTL level signals that can be used for synchronisation with external devices.

  • EDU Chemcap fume cabinets are ductless and have recirculatory filtration. They are made for use in education, because of the clear sides all around the cabinet teacher and students can have an excellent view into the cabinet to observe experiments. Also, the cabinet is supplied with manoeuvrable wheels, so you can freely move it around wherever you want.

     

    CARBON FILTRATION:

    The use of Chemcap carbon filtration makes sure a wide variety of vapours and fume is removed. This makes the cabinet perfect for laboratorys with mixed use. You can always contact us if you’re interested in wich chemicals are removed by the Chemcap carbon filtration.

     

    You have access into the cabinet by the trapezium shaped front acces port. Full access can be gained by raising the double hinged front doors. This bigger acces can be used for loading, setting up and clearing away after the use of the cabinet.

     

    The black PVC base tray is great for pointing out liquid and powder spills. The rear panel of the cabinet is supplied with 2 covered service ports, which can be used for power cable access.

  • Bigneat is an innovator in the design of laboratory safety cabinets for operator and sample/process protection. Excel Plus powder weighing stations incorporate aerofoil technology and graded rear back baffle to ensure reduced turbulence. This is to ensure precise control of horizontal air flow. Clear acrylic on front and both sides enable excellent vision of manipulations and comfort during use, whilst the black base shows eventual spilling of powder easily

     

    Keyword for Bigneat enclosures is always: Ductless cabinet.

    This means:

    • Precise control of air flow via built in fan
    • HEPA or ULPA filters are within the system
    • 175 mm access height across front window for easy manipulations
    • No connection to building extraction system, saving lots of energy (no warm air exhaust ), and no issues with air conditioning settings of the different lab spaces.

     

    Excel Plus powder weighing stations are used for the most demanding powder handling applications, such as high accuracy weighing (micro-balance), processing of pellets, capsules and tablets containing high potent powders.

    The Excel Plus cabinet in the Powder Handling enclosure range has been designed to provide the safest possible operation.

     

  • Bigneat is an innovator in the design of laboratory safety cabinets for operator and sample/process protection. Excel Plus powder weighing stations incorporate aerofoil technology and graded rear back baffle to ensure reduced turbulence. This is to ensure precise control of horizontal air flow.

    Keyword for Bigneat Powder Weighing Stations is always: Ductless cabinet.

    This means:

    • Precise control of air flow via built in fan. Use of micro balance 5/6 decimal place.
    • HEPA or ULPA filters are in the back side of the system, exchanged via “true safe change” procedure
    • No connection to building extraction system, saving lots of energy (no warm air exhaust ), and no issues with air conditioning settings of the different lab spaces.

     

    Excel Plus powder weighing stations are used for the most demanding powder handling applications, such as high accuracy weighing (micro-balance), processing of pellets, capsules and tablets containing high potent powders. Development and performance testing was undertaken with the support of a leading pharmaceutical R&D company.

     

    Excellent operator protection is achieved by enhanced airflow control and aerofoil technology which ensures that containment is achieved and maintained at the very low air flows required for balance stability.

     

    True Safechange Technology

    ‘True Safechange’ is a filter change procedure and mechanism that enables the safe bagging, within the cabinet, of spent HEPA particulate filters. Replacement is performed under negative pressure, with the cabinet running. This is effective alternative to a bag in/bag-out system.

     

  • Weighing Station – F3-XI – These cabinets have a very small footprint and excellent all-round vision. Cabinets have hinged access flap (F3-XIT-D) or corner tear drops (F3-XIT-S).

     

    Bigneat is an innovator in the design of laboratory safety cabinets for operator and sample/process protection.

     

    Powder cabinets (otherwise called stations, workstations or enclosures) utilise HEPA filtration technology and protect the operator from particles whilst weighing and handling powers.

     

    Optional extra: Base tray – manufactured from black PVC.

    NB: Black is ideal for highlighting powder spillages.

  • Looking for a way to automate data entry, improve payroll accuracy, cut labor costs, andreceive a quick ROI? Try 2nd Sight’s FairPickLite, an electronic harvest scale package thatoffers growers increased labor data capture flexibility in addition to the same benefits as our FairPick Pro mobile scale unit. Forget the hassle of punch cards! FairPick Lite without the frame is perfect for growing operations where pickers stay in the same area or come to a central location to receive credit for produce picked. Read more, or contact us to learn why FairPick Lite is a better way to harvest! Pickers always on the move? Purchase the rugged, mobile cart with your Lite system.

  • FairPick automates hand-harvesting produce. FairPickPro’s easy-to-transport weighing station includes an NTEP-certified scale with sunlight-readable instructional screen. In the field, the FairPick weighing station gives your pickers clear voice commands in multiple, user-selected languages. The FairPick is a mobile time clock that records accurate clock in and clock out times for minimum wage, non-productive, and break calculations. From the onlineCustomer Portal, growers manage employees and other harvest information. RFID (radio-frequency identification) technology allows the grower to program individual weighing stations with specific configuration settings and link employees, container RFID tags, and other information to each weigh entry. Read more or contact us, to learn why FairPick Pro is a better weigh to harvest!

  • Electronic Hourly and Piecework LaborTracking for Farm, Orchard, Vineyard, Greenhouse, and Nursery Operations, the FairTrak is a flexible tracking solution that allows the user to customize the type of data collected with a Ruggedized Handheld Computer (RHC). The FairTrak app provides the frame work for electronically recording any number of hourly and piecework tasks. We designed the software to meet the needs of many different agriculture operations. The RHC reads both RFID tags and 1D barcodes to accommodate many workflows. Every logged task receives a date and time stamp as well as GPS coordinates. The possibilities are endless—you’ll keep finding new ways to use FairTrak. Go paperless, keep organized digital records, and get the data you need to run payroll and make better farm management decisions. Read more, or contact us to learn why FairTrak is your Flexible Labor Tracking Solution. Robust hardware. Flexible software. Powerful data!

  • Both performance and user comfort of the FREESTYLE systems are significantly enhanced through the extensive range of accessories.

     

    In the following you will find a number of interesting options:

    • Upgrades for more solvents
    • Holder for solvent bottles
    • Barcode reader
    • Fill level sensor
    • SPE Columns made of Glass
    • Recirculation cooler
    • UV-detector
    • GPC columns
    • The GPC test standard – Quality assurance of your GPC Column
    • Nitrogen connection.
  • The FREESTYLE system is always based on the same principle: the FREESTYLE BASIC will be equipped with the necessary modules suitable for the intended purpose. Modules can be retrofitted at any time. This makes the system responsive to changing requirements in the laboratory and perfectly suitable for both small and high-throughput laboratories.

     

    The FREESTYLE BASIC consists of a XYZ-robot including injection pump, sample loop, solvent distribution and double-walled needle.

     

    The modules, with which the BASIC element is equipped, are selected in the software. The software permits the selection of individual modules or the application of all functions within one single method.

  • Sample clean-up via GPC (gel permeation chromatography) is used for all samples in the analysis of residues and contaminants and is therefore universally applicable. he FREESTYLE GPC is a fully automated chromatographic sample preparation system, that is used for example for clean-up of food, feed and environmental samples. It complies in all areas with the requirements of general methods, e.g. L 00.00-34, EPA 3640A.

     

    Particularly user-friendly is the combination of the FREESTYLE GPC with the EVAporation module. The chosen fraction is collected online in the vacuum chamber and after concentration transferred into one or several vials (e.g. GC vials). The result is a sample, which can be directly introduced into the analyser.